How are fireplace mantels installed?

How are fireplace mantels installed?

Is it hard to replace fireplace mantel? A painted wood mantel is the easiest to install. It may need to be shimmed till it’s plumb and level; then it’s fastened to the wall studs with countersunk screws. Most cast-stone mantels arrive in three or four solid pieces (each of which can weigh hundreds of pounds) and are installed with screws or masonry ties.

How deep is the average fireplace mantel? A depth of 7 inches is ideal for most mantels, as it allows plenty of room to accommodate decorative objects. Keep in mind that the top and the sides of the mantel should be the same depth. First, use a measuring tape and pencil to measure and mark the mantel top to size.

How far does a mantel need to be above a fireplace? Most housing codes and the National Fire Protection Agency (NFPA) state that the bottom of the mantel must be at least 12” away from the top of the fireplace box.

How are fireplace mantels installed? – Related Questions

Do you install mantel before or after stone?

It’s best to build the mantel right into the stone, rather than refinishing the fireplace first.

How do you know what size mantel to buy?

For a quick calculation on size, make sure that the mantel shelf width divided by 2 is less than the width from the fireplace center to any wall, window, door or shelf. Find the dimensions of the available wall space in order to size a mantel for a room.

How much weight can a fireplace mantel hold?

Combustible objects placed on or around the mantel must meet your fireplace manufacturer’s requirements for clearances to combustibles. DO NOT OVERLOAD MANTEL: THE MAXIMUM LOAD FOR ALL 60 INCH MANTELS is 150lbs. MAXIMUM LOAD FOR ALL 72 INCH MANTELs is 180lbs.

What is the best wood to make a fireplace mantel?

Walnut is a popular choice for fireplace mantels. It is a harder and heavier type of wood than most and is extremely durable. The rich dark brown wood is an excellent for an impressive fireplace mantel. Hickory is also a great choice for a fireplace mantel if you are going for a unique look.

How much does a new fireplace mantel cost?

Install a Fireplace Mantel: national average cost

The national average materials cost to install a fireplace mantel is $236.47 per mantel, with a range between $212.16 to $260.79. The total price for labor and materials per mantel is $578.11, coming in between $483.53 to $672.69.

How much does it cost to replace a fireplace surround?

Cost of Stone Fireplace Surround

A stone fireplace surround usually costs between $3,000 and $7,500 but could run anywhere from $2,500 to $10,000 or higher. The surround refers to any part of the fireplace built with stone, or the area surrounding the firebox.

Are fireplace mantels necessary?

Do You Need A Fireplace Mantel? A fireplace does not need to be furnished with a mantel, but a mantel can enhance the look of a fireplace either as part of fireplace surround or as a standalone mantel shelf.

What is the purpose of a fireplace mantel?

Mantel, also called Mantelpiece, hood or other similar projection, usually ornamented, that surrounds the opening of a fireplace and directs smoke up to the chimney flue. See chimneypiece.

How far should a mantle stick out?

The proportions of your mantel in relationship to your fireplace are important. Generally, your mantel should extend a minimum of three inches beyond the opening of your fireplace.

Can I put a TV above my fireplace?

The short answer is – yes. However, to ensure your television isn’t damaged from the heat, care must be taken to ensure heat generated by the fireplace is redirected away from television. There are several ways to do this, such as installing a proper mantel and building an alcove for the television.

Should you hang TV over fireplace?

Mount Your TV Above an Open-Fireplace

In most cases, you should not install electronics above wood-burning stoves or gas fireplaces and inserts because they produce massive amounts of heat. That heat could severely damage your tv or other electronic devices.

What is code for a fireplace mantel?

The National Fire Code dictates that any combustible material (e.g., wood mantel or similar trim) must be at least six inches from the firebox opening. An additional inch of clearance is needed for every 1/8 inch the combustible material or trim protrudes.

Can you put a mantel on a stone fireplace?

With stone fireplaces, it’s important to find a mostly flat section to securely mount the cleat and the mantel to. it’s possible a stone might stick out proud of the mantel and make it more challenging to mount the cleat. In that case, it usually makes sense to go a little higher.

How do you attach a mantel to Brick?

Lift the mantel and position it in place, aligning the holes in the back of the mantel with the support rods. Push the mantel onto the rods until the back of the mantle is against the bricks. Gently tap with a small hammer and a small piece of wood if necessary to completely align the mantel next to the brick.

Are fireplace mantels hollow?

These beautiful architectural elements are constructed with reclaimed wood and look great in a variety of living spaces. Our floating fireplace mantels are: Hollow on the inside, making them lightweight and easier to hang than solid wood mantels.

How do you hang a mantel on an uneven stone fireplace?

Use a 12-inch long masonry bolt to drill into your fireplace, and make sure that you use 7-inch wedge bolts for this part. If your stone is very uneven, use a 10-inch drop anchor bolt to make it happen. Vacuum the inside of the holes before you place your bolt. Place your holes every 10 inches apart.

Can you drill into stone fireplace?

Drill the pilot hole into the stone using the hammer drill. Do not place the pilot hole or screw on or near the edge of the stone, as it may damage or crack the stone. The depth of the pilot hole should be approximately ¼-inch greater than the length of the masonry screw.

How do you anchor a stone fireplace?

Using the masonry drill bit drill a hole into the stone/brick as deep as the lead anchor directions say to go. With a hammer tap the anchor into the hole. With a screwdriver insert the screw into the anchor leaving space to hang your art on the end. Hang your art!

Can a fireplace be too big for a room?

Regardless of heat output or TV size, the size of the fireplace should suit the size of the room. A small fireplace will be lost in a large space. Likewise, a large fireplace could overpower a tiny room. However, we see clients going too small far more often than going too big.

Is it safe to put TV on mantel?

The short answer is – yes. However, to ensure your television isn’t damaged from the heat, care must be taken to ensure heat generated by the fireplace is redirected away from television. There are several ways to do this, such as installing a proper mantel and building an alcove for the television.

How much weight can a brick fireplace hold?

It will hold up to 25 pounds which is much more weight than most picture frames or craft items. The strength of a single brick masonry unit varies widely, depending on its ingredients and manu- facturing method. Brick can have an ultimate compressive strength as low as 1,600 psi.